pallmann pall-x 325
floor store direct-pallmann-lacquer-primer-pall-x_325

Pallmann Pall-X 325 Wood Floor Primer 5L

€109.99

SKU: PM-F13267

Pall-X 325 wood floor primer is a water based one component roller applied primer, for highly absorbent wood floor surfaces to prevent side bonding prior to using any of our Pallmann floor lacquers.

Length:
Width:
Area sq. yd.:

Total Area sq. m:
Total Amount: 0



Product Description

Pall-X 325 wood floor primer is a water based one component roller applied primer, for highly absorbent wood floor surfaces to prevent side bonding prior to using any of our Pallmann floor lacquers.

Suitable for:

  • Sanded wood flooring
  • Use on wood floors installed over warm water underfloor heating systems.

Application:

  1. Before use, the container must be brought to room temperature (20 °C) and must be shaken well. Then pour the contents into a clean bucket
  2. Apply a layer of Pall-X 325 using the application roller water based universal 11MM/25CM evenly and generously to the substrates.
  3. The primed surface is ready for sealing after approx 2 hours.
  4. The primer must in all cases receive at least one seal coat within 24 hours.

Surface Preparation:

Before using a wood floor primer the surface to be primed must be clean, dry, free of impurities and sanded in accordance with the recognised industry standard.

Product benefits/Properties:

  • Fast drying
  • Clean appearance
  • Good colour enhancement
  • Minimises side bonding
  • Corresponds to TRGS 617
  • Water based primer with a solvent content of less than 5%
  • DE-UZ 12A/ Environmentally free because it is low in pollutants
  • EMICODE EC1 PLUS/ Very low emissions

Technical data:

  • Packsize: 5L
  • Shelf life: At least 12 months
  • Consumption per coat: Approx 100ml per sq.m
  • Coverage per coat: Approx 10 sq.m per litre
  • Working Climate: Between 18-25 degrees celsius and 35-65% relative humidity
  • Further coats: After approx 2 hours

Important Notes:

  • Optimum temperature is 18 to 25 °C and relative humidity between 35 % and 65 %. Low temperatures and high humidity will extend the drying time. High temperatures and low humidity will shorten the drying time.

  • Many exotic woods such as Teak, Ipe Lapacho, smoked Oak or Wenge as well as softwoods contain ingredients (e.g. so-called inhibitors, resins or mineral storages) which can lead to significant drying delays, wetting disturbances or colour changes. Due to the variety and different qualities of these woods, the species should be established and testing carried out before coating.

  • Recommended on commercially available, light-colored, European types of wood.

  • Shelf life minimum 12 months in original packaging when stored in dry conditions. Protect from freezing and do not expose to temperatures over 40 °C

  • Tightly reseal opened containers and use the contents as quickly as possible.

  • In principle, do not apply more than 2 coats in one day.

  • The primer must not be sanded.

  • The following standards and notices are applicable and especially recommended: DIN 18356 “Working with parquet and woodblocks”.

Check out all our social media HERE for updates on current and upcoming products!