Coretec Naturals 1500+ Embossed Flora – Click Floor
€65.99 sq. yd. (exc. vat)
€78.92 sq. m. (exc. vat)
SKU: PF-GLVRE2554/8WP
The future is here with the beautiful, resilient, waterproof Coretec Natural Collection. An LVT floor with a difference. Designed for comfort, warmth and stability, it comes in a staggering 8mm thickness with a natural cork underlay. Coretec Naturals 1500+ Embossed Flora is a stunning warm oak board with a beautiful embossed grain running through the floor. The embossed grain allows you to feel the texture and warmth in your new floor. The bevelled edge on two sides only give you a staggering look of continuity throughout your floor.
Product Description
The future is here with the beautiful, resilient, waterproof Coretec Natural Collection. An LVT floor with a difference. Designed for comfort, warmth and stability, it comes in a staggering 8mm thickness with a natural cork underlay. Coretec Naturals 1500+ Embossed Flora is a stunning warm oak board with a beautiful embossed grain running through the floor. The embossed grain allows you to feel the texture and warmth in your new floor. The bevelled edge on two sides only give you a staggering look of continuity throughout your floor.
ABOUT CORETEC:
All Coretec Floors are 100% waterproof, kid proof and pet proof. Suitable for use in kitchens and bathrooms, they won’t warp or buckle even if fully submerged in water. The 8mm thickness (unheard of in vinyl floors) provides structure and stability that cannot be matched. Coretec is easy to install, care for and clean and can be fitted on top of any hard surface.
CORK UNDERLAY:
Cork is a natural product that is one of the most sustainable materials around. It is harvested from the cork tree and can be re-harvested every decade without any damage to the tree. This makes it ideal for todays ecological concerns. The benefits of cork don’t just stop there. It is warmer, quieter and conceals imperfections better than most other underlays. Cork will also provide you with a natural protection against mould and mildew.
DIFFERENT STYLES OF FLOORING:
Coretecs Naturals Collection comes in the following different styles:
- 1200 is a smaller size plank that has a square edge fitting system with no bevelled edges.
- 1200+ is a smaller size plank that has a bevelled edge on all 4 sides.
- 1500+ is a medium size plank that has a bevelled edge on both sides but not the top and bottom boards.
- 1500+ Embossed is a medium size plank that has a bevelled edge on both sides but not the top and bottom of the boards. It also has an embossed textured surface.
- 1800+ Embossed is an extra long plank that has a bevelled edge on both sides but not the top and bottom of the boards. It also has an embossed textured surface.
*Not all colours come in all styles*
Coretec Naturals 1500+ Embossed Flora is also available in a matching Herringbone floor.
Contact us or call into one of our showrooms today.
Checkout all our social media HERE for updates on current and upcoming products!
Images are for illustrative purposes only and colours may differ from images shown.
Additional Information
| Design | Plank | Coverage | 2.75 sq.m |
| Product Type | LVT/SPC | Built in Underlay | Yes |
| Length | 1520mm | Suitable for Underfloor Heating | Yes |
| Width | 181mm | Waterproof | Yes |
| Thickness | 8mm | Locking System | Click System |
| Boards per Box | 10 | Installation Method | Floating |
Ask a Question
1. Does the "Flora" colourway have a pinkish or "flesh-toned" undertone in certain lights? Flora is a very pale, "bleached" oak, and like many light timbers, its undertone is highly dependent on your wall colour. If paired with cool grey or blue walls, Flora remains a crisp, neutral cream. However, if you have warm "terracotta" or deep "burgundy" accents in the room, the floor can reflect those tones, giving it a very slight, warm "blush." To keep Flora looking its truest, pale sandy beige or "stony" off-whites are the best paint choices.
2. How does the "Flora" finish deal with the visibility of "micro-scratches" from household dust? Because Flora is so light and has a soft, matte lustre, it is arguably the best colour in the Naturals range for hiding fine surface scratches. On a dark floor like "Forest," a tiny scratch in the wear layer shows up as a bright white line. On Flora, the base colour of the plank is so close to the colour of a surface scuff that they become virtually invisible. This makes it a fantastic choice for high-traffic areas like sunrooms or playrooms where toys might be dragged across the floor.
3. Is "Flora" too light to be used in a busy "boot room" or entrance hallway? While Flora is light, it isn't "white." The multi-tonal graining includes pale taupe and oatmeal streaks which are surprisingly good at disguising the occasional dry footprint or "dust bunny." However, because it is a very pale floor, it is highly recommended to use a "walk-off" mat at the entrance. If wet mud is tracked onto Flora, it will be more obvious than on "Acorn," but because the surface is non-porous, it won't "stain" the light planks; a quick wipe with a damp microfibre mop will restore the pristine "Scandi" look.
Fitting Guidelines
In order for your new floor to perform to the best of its ability we advise using a skilled, professional fitter for the installation of your new floor. Prior to installation your floor must be checked to ensure it is level and free from moisture. Should there be any issues with this our levelling compounds and damp proof membranes are available here. It is vitally important, in particular with a floating floor that you do not fit any heavy objects (Such as fitted kitchens or islands) directly to the floor. An installation gap of 10-12mm must also be left around all 4 sides of the room including at doorways. Please refer to manufacturers guidelines for full installation instructions.
Cleaning & Maintenance Guide
The cleaning and maintenance of our Coretec Flooring is pretty much the same as with all Vinyl Flooring. A sweep of a brush is all it should take to remove light dirt from your floor. For mopping, it is important you use a damp mop rather than a wet mop. If your floor is too wet, over time it may cause issues from water penetrating the joints. We advise the use of a PH neutral floor cleaner to ensure no damage to the floor. Please make sure to also check the manufacturers guidelines. Also a spin mop or micro fibre mop should ensure the floor is not being overly wet. You can view all our Cleaning & Maintenance products here.
